Prop stands (Pair)
These help support and
steady the rear of the
trailer when loading and
unloading (not available
on TA5/TA510 models).

Wind deflector
To improve the aerodynamics of the trailer the lightweight GRP
nose cone reduces drag and improves fuel consumption especially on those long journeys. Available for 6’ and 7’
models only.

Cross divisions
Both full size and half size
(upper and lower) cross
divisions are available.
These can be carried on the front of the trailer
(limitations apply when
nose cone is fitted.)

Centre partition
Only available in the 7’
headroom models, the
centre partition kit converts your livestock trailer to having two side-by-side stalls.

Dropside fitting, drop side and loading skids
Available on DP models only, this option allows the fitting
of dropsides and/or skids when the trailer is used as a
flatbed. This option must be requested at the time of
ordering.

Combination Ramp/Doors
Now available on TA5/TA510 on standard 6’/7’ headroom models. The factory fitted ramp operates normally but can also be opened as doors to allow fork-truck access. This is ideal for loading pallets etc.* Not available with deck system.

This option must be stated at the time of order as they cannot be offered
as a modification.

*Always ensure that the load is distributed evenly and centred over the axles.